Re: Set-vipermission to groups at Network Level in vCenter?
LucD, Indeed I did. And that fixed it! Thanks! John
View ArticleRe: Cannot connect to esx host after creating new service profile in UCS...
Also the SSH was not enabled in the esxi host so i enabled it but still i could not access through the putty.
View ArticleRe: Is task and alarm panel available for plugin development 5.1?
hey laurentsd thanx for the information,Is their any way using that i can push my Flex UI Screen to Work in progress wizards and restore it as on require.
View ArticleОшибка View
Добрый день уважаемый, решил руководство уговорить на покупку VmWare View. Но столкнулся с таким сюрпризом. Все сделал по туториалу настроил, но при запуске клиента получаю вот такое вот окно Кто...
View ArticleRe: Бюджетное хранилище
Ну приоритет задач обслуживания еще и настраивается на самой хранилке Я не иопсы во время ребилда имел ввиду, а сравнение иопсов при 5м и 10м рейде на одном и том же железе. Так, для себя, сравнить...
View ArticleRe: Cannot connect to esx host after creating new service profile in UCS...
Hi, Since DCUI session is possible.Can you please post alt+f12 screen shot.Also do ping the gateway from the DCUI
View ArticleRe: ESXi3.5 hosts copy to ESXi5.1
1: vmware converter would be the way to go as DaveM said. 2: if the vms have hardware 4 you could just copy over the files /restore from backup onto your new host/storage and just upgrade the vmware...
View ArticleRe: Бюджетное хранилище
Я слоубро, почему "И еще интересно время ребилда этих 12 терабайт. Может пожертвовать емкостью и немного скоростью записи и сделать RAID10?" Разве скорость записи на лун RAID10 ниже скорости записи на...
View ArticleRe: Video subsystem Mac Pro issue
Have you checked if ESXi has actually booted? It looks like "Multiboot could not setup the video subsystem" is just a warning message, and it should continue to try to boot the OS (without any further...
View ArticleRe: Cannot connect to esx host after creating new service profile in UCS...
I did ping the gateway ip from DCUI it came as failed. Will update the screen shot in few min as am in differentlocation from datacenter.
View ArticleRe: Invoke-vmScript giving Error
The Select statement a couple of answers ago. Try to run it again. If there is an authorisation problem, I would expect to see some error mesasges for that.
View ArticleRe: Бюджетное хранилище
Ну если на пальцах - запись одного и того же объема на рейд5 из N витов идет одновременно на N-1 и отдельно четность. При хорошем контроллере время на высчитываение четности можно отбросить я думаю....
View ArticleRe: Methods to "reserve a virtual machine"
It sounds like you're looking for the ability for a developer to check out a VM or set of VMs, do their work on them, and then either check them back in or discards the VM(s). Is that correct? VMware...
View ArticleRe: Cannot connect to esx host after creating new service profile in UCS...
Is there any issue with the Vlan id in ucs manager if so how can i go about it as there is only one vlanid in the service profile for all the 4 host.Did you make sure the vLAN ID of the ESXi host is...
View ArticleRe: Who Built the vm
The retention intervals can be set in the vSphere Client under Administration-vCenter Server settings-Database Retention policy.
View ArticleRe: Invoke-vmScript giving Error
It is giving me all the right values Get-VM EQ2 | Select Name, @{N="LogPath";E={$_.ExtensionData.Config.Files.LogDirectory}}, @{N="vmPathName";E={$_.ExtensionData.Config.Files.vmPathName}}Name...
View ArticleRe: Cannot connect to esx host after creating new service profile in UCS...
Hi, Gateway is not reachable!!! That's strange.Please do post the O/P of the below commands ESX 3/4--------esxcfg-vswitch -l # list current vswitch configurationesxcfg-vmknic -l # list...
View ArticleRe: Invoke-vmScript giving Error
Ok, back to the Get-VMLog function, that is still giving you this error ? Copy-DatastoreItem : 2/28/2013 12:37:13 PM Copy-DatastoreItem Cannot find path 'MyDS2086900101:\b_machine_6' because...
View Article