Re: VMWare ESX 3.5 not reporting performance to VCenter
Hello and welcome to the communities. Check out http://kb.vmware.com/kb/1003490 for much more info - including an important caution. Message was edited by: vmroyale - remembered the caution bit and...
View ArticleRe: Best Practice for View 5 Setup
Your discussion has been moved from VMware vCenter™ to VMware® Horizon™ View forum. The machine cannot use more than what you assign it therefore I see no reason for you to impose limits from the...
View ArticleRe: Application consistent bacups, freeze scripts, enableuuid...
What backup product are you using?
View ArticleRe: Random Host Disconnects in virtual center
Thanks. Could you look under storage adapters section on the configuration page of the ESXi host and check if the mpx.vmhba0 C0 T0 L0 is a CDROM device or a local disk?
View ArticleRe: Conversion to ESXI format fails - Error 23
Error means "Data error (cyclic redundancy check)."Check the VM copy.HTH
View ArticleRe: PowerCLI script to alert on snapshots in vSphere
No, I meant like this Connect-VIServer-server$vcenterserver$date=Get-Date$VMsWithSnaps=@(Get-VM|Get-Snapshot|SelectVM,Name,Created,sizemb)# Make sure the body isn't empty. If it is, skip this part and...
View ArticleWill EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND...
HI Experts , Will EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND Intel(R) Xeon(R) CPU E5620@ 2.33 GHZ Not able to check in Compatibility Guide Please help not able to do Vmotion
View ArticleRe: PowerCLI script to alert on snapshots in vSphere
Some <CR><LF> got lost during the copy/paste it seems.I corrected the lines above, please try again.
View ArticleTroubleshooting - No machines in the Desktop Pool are responsive
In the school district I work for we have had trouble with clients getting a desktop when a high number of clients try to logon at the same time. We get this message: Unable to launch from Pool...
View Articlevsish -e set /vmkModules/iso9660/mount $(esxcfg-mpath -b | grep "CD-ROM" |...
I am attempting to perform the following mount on a on the new MAC Mini Superdrive " vsish -e set /vmkmodules/iso9660/mount $ (esxcfg-mpath -b | grep "CD-ROM" | awk '{print $1}') and getting the...
View ArticleRe: Who Built the vm
If you only keep the events for 1 day the alternative could be to place the information in some custom attributes, like CreatedBy and CreatedOn. To compare the VMs from yesterday with the ones of...
View ArticleRe: vMotion traffic isolation with VDswitch best practive question (ESXi 5.1)
You could use multi-nic vmotion seeing you have plenty. Here is Duncan's article on how to do it. http://www.yellow-bricks.com/2011/09/17/multiple-nic-vmotion-in-vsphere-5/ If you are not splitting up...
View ArticleProblem with Two NIC card
I have Two Different Vlan 1-192.168.33.0 For San Storage 2-10.33.86.0 For my network From my PC i have Two NIC My problem now I am running centos 6 on Vmware . from centos I could see just one...
View ArticleHow to automate adding guest to host inventory when host managed by vCenter
I want to be able to programmattically add virtual machines to the inventory of vCenter. I.e. I don't want to have to add them interactively via the vSphere gui. The following KB article says that...
View ArticleRe: GemFire and Atomikos in tcServer
Can you run with this in your gemfire.properties:log-level=finer
View ArticleRe: Will EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND...
Is dell precision Supported for Esxi 5.0
View ArticleRe: vsish -e set /vmkModules/iso9660/mount $(esxcfg-mpath -b | grep "CD-ROM"...
I was able to confirm and review command.
View ArticleRe: Will EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND...
Workstation class machines are not typically certified by VMware or the applicable hardware vendor. EVC should still work OK. You'll be limited to L1 - Intel Penryn due to the L5410 processor. When...
View ArticleRe: Help needed.....Configuring SSO with vmware view
When you install View Agent on the virtual desktop SSO is enabled by default. Just follow the steps in the View 5.1 installation guide. You might also want to look at the Architecture Planning Guide....
View Article