Quantcast
Channel: VMware Communities: Message List
Viewing all articles
Browse latest Browse all 197835

Re: Problem Networking with Crossover Cable from ESXi 5.1 to NAS Server

$
0
0

The VM indeed has two IP addresses -- the main interface, which also has a gateway set, is on a LAN and has an address in 10.100.0.x/255.255.255.0 while the second interface connected cross-over is on 10.100.1.0/255.255.255.0 with no gateway. I am not seeing any traffic whatsoever in tcpdump or anything (and yes, I enabled promiscuous mode in VMWare for the vSwitch1 ). When I attempt to ping from the other machine connected on the cross-over, it should receive it and send it back out that interface as it is coming in that interface and has a source and destination IP on that interface. I tried setting up a VMKernel for management traffic with an IP of 10.100.1.2 and it didn't work, but I will give it another go right now.

 

OOPS: Forgot to mention, the IPs are different because I changed my network scheme around. They all match from host to host. No typos or anything, and the netmasks are consistent across each interface.


Viewing all articles
Browse latest Browse all 197835

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>