Can your method limit certain VMs from reporting SNMP to a destination Host?
Re: VROPS 6.3 SNMP Trap Filtering
↧
↧
Re: OpenModalDialog () interface to open the window display problem
Hi,irahov,
the pop-window opened by API will be the same as the one of fling-web-client like the shown of under picture.
There are some points that I want to know.
First,the close button of upper right corner of the pop-up window can be setted to show or hide?
Second,can I move the pop-up window by pressing the title bar and moving?
Third,can I change the size of the pop-up window by pressing the icon of lower right corner of the pop-up window and moving?
If you can do so, please tell me about how long I can use,thank you.
↧
Re: OpenModalDialog () interface to open the window display problem
Hi,irahov,
I have some ideas.
I want to add an icon before the title of pop-up window and I want to change font size of the pop-up window's title.
I have writed a method to open a dialog to show loading message, I want to mask the all content of the pop-up window include the title bar when the loading dialog is opened.
But it only masks the content area now, the title bar of the pop-up window is not masked as shown in Fig.
If you can do so please tell me, thanks a lot.
↧
Management packs on vRealize Operations Manager Remote Collector Nodes
Hello,
Do we need to install the Third party management packs on vRealize Operations Manager Remote Collector Nodes to collect the data from respective technology ( such as Storage , Computer) and do we need to install the same on Master Node as well, In my scenerio we have a Master node which doesn't need to collect metric data from Storage but Remote collector needs to collect the storage related metric.
want to know if i have to configure the storage management pack on both ( Master Node & Remote collector ?) or Only installing the storage management pack on Remote collector will help
Thanks
Niran
↧
Please, help my VDP DIsk full issues.
My VDP version is 6.1(based EMC).
VDP Backup schedule is not running, because that appliance state is "admin" status.
"gsan" service was degraded. From the logs I can see it might caused by disk full, but even I cleared all my restore points, disk space won't be reclaimed because appliance status is "admin".
Here are some of my VDP state, anyone can help? Thank you so much.
root@vdp:~/#: dpnctl status
Identity added: /home/dpn/.ssh/dpnid (/home/dpn/.ssh/dpnid)
dpnctl: INFO: gsan status: degraded
dpnctl: INFO: MCS status: up.
dpnctl: INFO: emt status: up.
dpnctl: INFO: Backup scheduler status: up.
dpnctl: INFO: axionfs status: down.
dpnctl: INFO: Maintenance windows scheduler status: enabled.
dpnctl: INFO: Unattended startup status: enabled.
dpnctl: INFO: avinstaller status: up.
dpnctl: INFO: [see log file "/usr/local/avamar/var/log/dpnctl.log"]
root@vdp:~/#: status.dpn
Thu Nov 3 13:01:01 KST 2016 [vdp.kj1.netact.skt.com] Thu Nov 3 04:01:01 2016 UTC (Initialized Mon Feb 15 06:27:42 2016 UTC)
Node IP Address Version State Runlevel Srvr+Root+User Dis Suspend Load UsedMB Errlen %Full Percent Full and Stripe Status by Disk
0.0 38.123.3.89 7.2.80-98 ONLINE fullaccess mhpu+0hpu+0000 1 false 0.30 14872 16371111 32.9% 32%(onl:1166) 32%(onl:1164) 32%(onl:1167)
Srvr+Root+User Modes = migrate + hfswriteable + persistwriteable + useraccntwriteable
System ID: 1455517662@00:50:56:BA:A1:74
All reported states=(ONLINE), runlevels=(fullaccess), modes=(mhpu+0hpu+0000)
System-Status: ok
Access-Status: admin
Checkpoint failed with result MSG_ERR_DISKFULL : cp.20161103033244 started Thu Nov 3 12:33:14 2016 ended Thu Nov 3 12:33:14 2016, completed 0 of 3497 stripes
Last GC: finished Thu Nov 3 12:32:44 2016 after 00m 30s >> recovered 0.00 KB (MSG_ERR_DISKFULL)
No hfscheck yet
Maintenance windows scheduler capacity profile is active.
The maintenance window is currently running.
Next backup window start time: Thu Nov 3 20:00:00 2016 KST
Next maintenance window start time: Fri Nov 4 08:00:00 2016 KST
root@vdp:~/#:
root@vdp:~/#: df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 32G 6.0G 24G 20% /
udev 7.8G 180K 7.8G 1% /dev
tmpfs 7.8G 0 7.8G 0% /dev/shm
/dev/sda1 128M 37M 85M 31% /boot
/dev/sda7 1.5G 160M 1.3G 12% /var
/dev/sda9 138G 16G 115G 12% /space
/dev/sdg1 512G 499G 14G 98% /data01
/dev/sdh1 512G 497G 16G 98% /data02
/dev/sdi1 512G 499G 14G 98% /data03
I think that issue cause are "/data01", "/data02", "/data03" locations.
But that locations have some checkpoint files.
I don't how delete that checkpoint files.
Please, help me. Thank you so much.
Best Regards,
Neal.Choi
↧
↧
Re: Iniciar VMs automaticamente
ONDE FICA ISSO NA VMWARE ESXI na parte de configuration --> Virtual Machine Startup,
↧
Re: Vcenter SSL error
yeah,it's the answer,but the procedure is too complex.
hope vmware can make it easier to change settings about vcenter.
greatlly thanks~
↧
Re: Management packs on vRealize Operations Manager Remote Collector Nodes
You need to configure on collector also
↧
UEM 9.x and local accounts
We're updating our environment to Horizon 7 from 6.2 and at the same time updating UEM from 8.7 to 9.1. Unfortunately I have found with UEM 9 installed I can no longer log into the local accounts on my parent images. Any network account I can login into just fine. As soon as I remove UEM 9 local accounts work just fine again. Any ideas what I need to change to make UEM 9 allow me to use local accounts.
↧
↧
Re: Script to clean up datastores
Both your assumptions are correct.
↧
Hi! Is there any opportunity to use storage in OCFS2 format as datatstore without formatting it in vSphere?
I have storage with ocfs2, for about 4tb. There are some virtual machines in xen. I want to migrate or convert them to vSphere. So that is why i have to use this storage as datatstore, but when i try to add new storage, vSphere doesn't see this file system and suggest to format all 4tb.
Has anyone encountered this problem?
Or maybe there is another way to solve this problem?
Thank you.
↧
Re: Les performances du périphérique naa.600605b008afa1201af27d9739aa213f se sont détériorées. La latence d'E/S est passée de la valeur moyenne de 207 microsecondes à 7005 microsecondes.
This is not error, just a warning (information) and it said that latency is increased. The latency is also very low.
This event will be triggered when latency is increased to larger number compare than previous state.
↧
Re: vCSA6: Windows/Domain Login doesn't work
Has no one a hint, how to fix this?
↧
↧
Re: Upgrade from 5.5 latest to 6.0U2m using migration assistant fails in pre upgrade checks
Moderator note: Product questions/issues should be posted in the relevant area for that product - thread moved to vCenter Server.
↧
Office 2013 Settings not being retained
Hello
I have a Horizon 7 installation using non-persistent desktops (refresh at logoff), VMware AppVolumes and UEM v9.x
I have installed UEM and have run Easy Start to add the Office 2013 application templates.
My users have a mandatory profile configured, so I am hoping to use UEM to import / export application settings.
When a user logs on for the first time, I can see the EUM profile get created. I change some settings in Windows Explorer (show hidden files etc), I change some Word 2013 settings (default font size)
Then I logoff. The profile archive is created and the settings for Windows Explorer and Office 2013 (including Winword) are exported into the archive. Looking at the Debug log, I can see that this all happens as expected and there are no errors logged.
When I log back on (to a different desktop in the pool), the settings for Windows Explorer are retained, but the Office 2013 settings I modified are lost.
To troubleshoot, I have created a standard Windows 7 VM and installed office 2013 locally. When I logon to this machine, the Office settings are being reatined (but this could be due to the profile being created on the C:\Users on the desktop and being available at next logon).
Everything else in UEM appears to work ok, but this is causing me a lot of headaches with users complaining their settings are not retained
Can anyone offer any advice please?
Regards,
Sean
↧
vRo embedded vith vRA 7.1 - cannot delete vRO endpoint entries into Administration / vRO Configuration / Endpoints
Hello,
I'm tring to delete vCenter entries that I don't use anymore. but when trying, I got this error :
Unable to delete a vCO endpoint of type 'VC'. Reason: 'java.net.MalformedURLException: no protocol: [ id=vcenter.test.local ]'
Any clues?
↧
Re: Office 2013 Settings not being retained
Just to add that I have tried removing the mandatory profile to see if this is causing the issue. Each time the user logs on they create a new profile, but the settings for Office are still not applied
↧
↧
Re: Error when selecting Script Action in Property Definitions in vRA 7.1
Hello,
Return values MUST BE type of "Array/String"
Any other things like "Any" will not works.
Eventually you can define this by script which will return Array/String value. So do that you will have to create a new workflow into vRO
After that you can retrive them into vRA custom proterties
Hope this helps.
Regards,
Jacques
↧
Re: OpenModalDialog () interface to open the window display problem
Hi, dhbtemp,
* scrolls - the iframe is all yours, you can use css in order to remove any scrolls (by modifying the size of the content)
Even you have pointed that 'In the 1920*1080 one, it is a normal display as shown in Fig.' I see it is not normal since there is a horizontal scroll bar at the bottom.
An action item for me is to verify the framework angainst maximum sizes that you have mentioned
* close button - as it is mentioned in the 'Known issues' section of the Getting_Started_with_HTML_Client_SDK.pdf file from the Fling it is always displayed.
* move & change size by dragging - currently not supported. I have asked the team that develop the component if they have any future plans about this
* icon in the dialog - they are currently supported for dialogs that are shown as a result from an action invocation (see Getting_Started_with_HTML_Client_SDK.pdf ) , not for dialogs opened by the general 'WEB_PLATFORM.openModalDialog' functionality
* font size - not supported since this is a dialog from the platform and all platform dialogs are supposed to be uniform
* loading message will not be allowed to overlay the whole dialog since this will interfere with the user capabilities to abort an action at his/her will. In addition if for some reason the plugin becomes unresponsive in the 'loading' state then the whole application will be unusable. This is something that should not be allowed in any case.
I'll use your feedback/questions and bring them to the attention to the PM/PO of the SDK.
So really thank you a lot!
↧
Re: Office 2013 Settings not being retained
Is your Office 2013 natively installed on your master image or is it a AppStack?
Can you give a little more details on your steps to troubleshooting?
Did you create a non-persistent pool with Office 2013 natively installed?
Are the two machines in a non-persistent pool?
↧
More Pages to Explore .....
