I'm afraid I don't have any ideas, other than either A) trying to copy the prime client again (perhaps something got corrupted during the copy?) or B) rebuilding the prime client.
Re: Working tile moved from one environment to another and does not work in the new invironment .-(
↧
↧
Re: Office 2013 - Outlook previewer not working
Please file a support request with VMware to look into the issue in detail.
↧
Re: VMWare Player unrecoverable error: (vthread-11)
Hi, I have been uninstalling various Asus programs. I have not had a crash since my latest uninstalling:
- ROG Game First III (1.00.32)
- Asus Sonic Suite Plugins (2.2.701)
Looking at another post I think the issue was: ROG Game First III
If you are running this please have a go at uninstalling; my VMware Workstation has been stable for a little over a week now.
↧
Re: vSphere Web Client breaks randomly with VCSA
Hi
I have been trying to fix this for days and was experiencing all the same symptoms you mentioned here in your post.
This is what i found and as simple as it sounds it worked for me.
My webclient URL address was going to https://virtualcentre/vsphere-client/?csp which normally took me directly to the log in page for the web client.
deleting /vsphere-client/?csp worked so i tried going to https://virtualcentre/ (virtualcentre being my real virtual centre server name) and from there i clicked log in to vSphere Web Client.
Hope that helps.
↧
Re: Cluster Re-balance Failure
Same datacenter in vCenter...
↧
↧
Re: 8.5 Keeps crashing
Still happening with the latest 8.5.1 update...
↧
I want to install ESXi 6.0 at workstation 12.0 pro but during installation msg show "no Network adapter"
Hi,
first, I tried to install exsi 6.0 update 2 at physical machine then it shows the error "No network adapter".
then I install vmware workstation 12.0 Pro at my laptop and try to add ESXi VM. but during insallation it show same msg .
why it is so ? while I am not insalling on physical hardware. I am installing on workstation it mus pass out LAN card. why it does not accept my existing LAN Card
my LAN card PCI-ID: 1969, Dev-ID: 10A1
qualcomm Atheros AR8171/8175 PCI-E Gigabit Ethernet controller (NDIS 6.30)
Thanks a lot in advance for reply me.
↧
Re: Cluster Re-balance Failure
So looking at the release notes i pasted earlier and the error message you got... the storage must be shared for "rebalance container" to work..
Unfortunately i dont have an environment to test this on which have actions enabled on so i cant 100% confim it...
I raised the original requirement or MoveVM, custom datacenters and Rebalance Container to VMware and the early version didnt perform storage vMotions (it was about balancing out CPU and MEM contention)
↧
Re: vsan build
Thank you Zach, Appreciate your reply.
I will certainly look into all flash arrays, Being new to this my concern is we will not have enough storage with all flash as currently the customer has a boat load of data such as jpg files etc that won't really compress.
If possible i would prefer to stick with cisco for switching as we have great local support for cisco and the customer is a cisco shop for routing and switching so trying to keep the same infrastructure in place if possible. Do you know who i could contact at VMware for example to find out what cisco switches they would recommend?
I would like to stick with 512e only because the customer has some 512e servers already that we will provision into the solution once we add some hybrid flash.
On that note, does anyone know when 6.5 will be available
Also last dumb question, In a four host cluster: Will VSAN alert you if there is no longer enough space for a failed host. I have done the calculations and we will have 10TB free after a failed host, however if the customers data grows, will it alert us that it will no longer support the failover host option.
Thanks again Zach
Luke
↧
↧
Re: Reaching out to anyone that has use Actifio in a vSphere enviroument
Thanks for posting the question and providing so much detail around what has already been attempted. I'm an Actifio employee and have received the following response from one of our Senior Product Managers at Actifio and can share some details with you on a pair of enhancements we are working on that are specifically related to the behaviour you have observed.
The first enhancement is to parallelize the HBA scanning process. This will prevent the mount from taking much longer when you select "Map to all ESX hosts in the cluster", so instead of taking 7 minutes, the mount will take approximately the same time as mounting did before you requested the LUNs to be shared. Typically this is about 1-2 minutes.
The second enhancement is to add a 3rd option for users when performing a mount to a VM. Today the user can select "one" or "all" for the number of ESX hosts in the cluster that should see the mounted disks, the third option we are adding will be "two". When the user selects this option we will map the disks to just two hosts in the cluster, which will allow the VM to be moved between these two hosts and avoid the lock-in that happens when you select "one", but it will not consume a mounted disk on each host, and the time to mount on very large clusters will be much less.
In the interim before these enhancements are released, your statement about adding a 2nd NIC to your VM and attaching it to the iSCSI network is a valid option to resolve the problem in the current GA release. Either solution is acceptable technically and fully support and the implementation comes down to your architectural preference. Alternatively, most mounts are not so time sensitive that 7 minutes presents much of a problem. The exception would be if the mounts are very short lived and high frequency, of course.
↧
Re: I want to install ESXi 6.0 at workstation 12.0 pro but during installation msg show "no Network adapter"
WS does not "pass out a LAN-card"
The virtual ESXi should have at least one virtual networkcard. Make sure you create the new VM for the ESXi as guest OS "VMware ESXi 6"
↧
Re: Intended vSphere console screen blanking upon user connection
Thanks for your feedback.
↧
Re: New Linux VDI User with a couple questions
Thanks for your feedback.
↧
↧
Re: VMWare Player unrecoverable error: (vthread-11)
Glad to know the root cause has been identified. Thank you Neverlyn for your update.
↧
Re: Move Windows Patched VM from one vCenter to another vCenter (ovftool) using vSphere PowerCLI
Hi,
Thanks for your reply
Error: OVF Package is not supported by target:
- Line 26: Unsupported hardware family 'vmx-11'.
Completed with errors
FYI, the source VM's HW version is vmx-11 running on vCenter server version 6.0 and target vCenter server is running on version 5.1 supports vmx-9
The script is as follows
# Using ovftool to export a vm as an ovf template
$ovftool="C:\Program Files\VMware\VMware OVF Tool\ovftool.exe" # If the ovftool.exe is not in your path, you need to specify the full path here.
$sourceVM='xxxxxxxx'
$sourceVIServer='xxxxxxxx'
$targetVIServer='xxxxxxxx'
$targetDatacenter='xxxxxxxx'
$sourceNetwork='xxxxxxxx' # This is the portgroup that the VM is currently on.
$targetNetwork='xxxxxxxx' # This is the portgroup that you want the VM placed onto.
$targetCluster='xxxxxxxx'
$targetDatastore='xxxxxxxx'
Connect-VIServer$sourceVIServer
Connect-VIServer$targetVIServer
$VIServers= @{
$DefaultVIServers[0].name =$DefaultVIServers[0];
$DefaultVIServers[1].name =$DefaultVIServers[1]
$sourceVMMoref= (get-vm$sourceVM-Server$VIServers[$sourceVIServer]).extensiondata.moref.value
echo"sourceVIServer = $($VIServers.$sourceVIServer)"
$sourceSession=Get-View-server$VIServers.$sourceVIServer-Idsessionmanager
$sourceTicket=$sourceSession.AcquireCloneTicket()
echo"targetVIServer = $($VIServers.$targetVIServer)"
$targetSession=Get-View-server$VIServers.$targetVIServer-Idsessionmanager
$targetTicket=$targetSession.AcquireCloneTicket()
$sourceTicket="--I:sourceSessionTicket=$($sourceTicket)"
$targetTicket="--I:targetSessionTicket=$($targetTicket)"
$datastore="--datastore=$($targetDatastore)"
$network="--net:$($sourceNetwork)=$($targetNetwork)"
$source="vi://$($sourceVIServer)?moref=vim.VirtualMachine:$($sourceVMMoref)"
$destination="vi://$($targetVIServer)/$($targetDatacenter)/host/$($targetCluster)/"
echo$datastore$network$sourceTicket$targetTicket$source$destination
&$ovftool --lax $datastore$network$sourceTicket$targetTicket$source$destination
Please advise
Much appreciate your help
Thanks
↧
Re: VMware with windows 7 can't install driver for my external hard drive
Hi RDPetruska,
After that, if it will not work, can I still use Version 7?
Thanks,
Alyssa
↧
Re: Dell R730xd on VSAN 6.2 Boot Hung at "vmkfbft loaded successfully"
Hi Guys
This is Shen from GSS China
My customer report a totally same issue , vsan 6.2 booting stuck in vmkfbft. After my customer contact dell , dell offer a new custom image , then the issue was fixed .
Here is my customr hardware info and ISO download link ,
Key Value Instance: lsi_mr3-51866da0751f6600/LSI Incorporation
Listing keys:
Name: MR-DriverVersion
Type: string
value: 6.903.85.00
Name: MR-HBAModel
Type: string
value: Avago (LSI) HBA 1000:5d:1028:1f
Name: MR-FWVersion
Type: string
value: Fw Rev. 25.4.1.0004
Name: MR-ChipRevision
Type: string
value: Chip Rev. C0
Name: MR-CtrlStatus
Type: string
value: FwState c0000000
If your vendor is DELL , please contact dell which is a fastest way to fix this issue.
Thanks
Shen
↧
↧
Re: Help with my VDP, disk full issue
Hi, hiscal
I need your help.
My VDP also has the same problem as you.
Please let me know how you solved this problem.
Thank you so much.
Best Regards,
Neal.Choi
E-Mail : sanha.choi.ext@nokia.com
↧
после перезагрузки гостевой машины пропадает сеть
Добрый день, коллеги.
Есть такая проблема: после перезагрузки хоста, с корректным завершением работы на многих машинах пропадает сеть. Сетевые карты на месте, но пинги не идут не в сторону гостевых машин, не из них. Всегда помогает смена МАС адреса в свойствах сетевой карты, (через Vsphere Client). В чем может быть дело?
↧
Re: OpenModalDialog () interface to open the window display problem
Hi,irahov,
thanks for your reply!
I'm sorry that I didn't have explained the problem clearly. Now I hava sort out the issue.
I want the content to be displayed correctly and no scrollbars appear. But there are some issues with the display.
I have two monitors to display.The resolution of a display is 1440*900 and another is 1920*1080.Now I use these monitors to show the pop-up window.
I use the API "WEB_PLATFORM.openModalDialog(title, url, 872, 485, null, 'no', false); " to create a pop-up window.
In the 1920*1080 one, it is a normal display as shown in Fig.
In the 1440 * 900 one, there is a problem with the display, a scroll bar appears, as shown in Fig.
And In the 1920*1080 one, I used another parameter, "WEB_PLATFORM.openModalDialog(title, url, 872, 486, null, 'no', false); ", to create a pop-up window.
The height is changed from 485 to 486, then there is a problem with the display, a scroll bar appears, as shown in Fig.
I found that the height of the pop-up window appeared the maximum and the maximum is different when the monitor's resolution is different.
↧
More Pages to Explore .....
